Standard Saw Blades

For Cutting: Softwoods, Hardwoods
Designed for ripping both hard and softwoods. Can be used in both hand or automatic feed operations. Each tooth is 100% effective. Capable of faster feed rates over TCG and ATB styles. Can be modified for gang rip operations if desired.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or Mounting ...

For Cutting: Softwoods, Hardwoods
Designed for ripping both hard and softwoods. Can be used in both hand or automatic feed operations. Each tooth is 100% effective. Capable of faster feed rates over TCG and ATB styles. Thicker saw plate and kerfs for high production runs. Can be modified for gang rip operations if desired.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge ...

For Cutting: Softwoods, Hardwoods
Designed for ripping both hard and softwoods. Can be used in both hand or automatic feed operations. Each tooth is 100% effective. Capable of faster feed rates over TCG and ATB styles. Extra thick saw plate and kerfs for high production runs. Can be modified for gang rip operations if desired.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional ...

For Cutting: Softwoods, Hardwoods
Designed for ripping both hard and softwoods. Flat top tooth design for automatic feed machines. Each tooth is 100% effective for more effective cutting. Machine specific with available keys and pins where required.

Note: We can not open bore these saws unless the bore is greater than the existing keyway area.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes ...

For Cutting: Softwoods, Hardwoods
Designed for ripping both hard and softwoods. Triple chip tooth design for high production applications and long tool life. Machine specific with available keys and pins where required.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or Mounting Hole(s).

For Cutting: Softwoods, Hardwoods
Designed for ripping both hard and softwoods. Triple chip tooth design with glue line specifications. Provides smooth clean cuts for edge gluing. For use on the Mereen Johnson 424 Gang Rip Saw and other machines.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or Mounting Hole(s).

For Cutting: Softwoods
Designed for rip cutting softwoods. ATB tooth design. Provides splinter free high quality cuts in softwoods. Provides smooth clean cuts for edge gluing.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or Mounting Hole(s).

For Rip and Cross Cutting: Softwoods and Hardwoods
Designed for general purpose rip and cross cutting of both hard and softwoods. Triple chip tooth design for high production applications and long tool life.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or Mounting Hole(s).

For Cutting: Softwoods, Hardwoods
Designed for cross cutting softwoods and hardwoods where a superior quality cut is required. Alternate top bevel tooth design. Provides smooth cuts with minimum tearout on end grain applications even in thin material.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or Mounting Hole(s).

For Cutting: Softwoods, Hardwoods
Designed for cross cutting softwoods and hardwoods. Alternate top bevel tooth design. Provides smooth cuts with minimum tearout on end grain applications. Use on table saws, radial arm saws, cut-off saws and variety saws.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or Mounting Hole(s).

For Cutting: Softwoods, Hardwoods
Designed for cross cutting softwoods and hardwoods. Triple chip and raker tooth design. Excellent choice for long tool life and abrasive applications. Use on table saws, radial arm saws, cut-off saws and variety saws.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or Mounting Hole(s).

For Cutting: Softwoods, Hardwoods
Use where extra fine cross cuts are required. Alternate top bevel tooth design. Provides smooth cuts with minimum tearout on end grain applications especially in thin material. Ideal for thinner sheets of material.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or Mounting Hole(s).

For Cutting: MDF, Particle Board, Plywood & other Composite Materials
Designed for cutting composite materials such as MDF, Plywood, OSB, Particleboard, etc. Triple chip and raker tooth design. Excellent choice for long tool life and abrasive applications. Provides excellent cuts on material.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a ...

For Cutting: Softwoods, Hardwoods
Designed for cross cutting and rip cuts in softwoods and hardwoods. Four alternate top bevel teeth with one flat raker tooth. Gullet on raker tooth of saw blade. Provides smooth cuts with minimum tearout.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or Mounting Hole(s).

For Cutting: Softwoods, Hardwoods, Melamine, Veneer & Laminated Board
Designed for cross cutting softwoods and hardwoods. Four alternate top bevel teeth with one flat raker tooth. Provides smooth straight and mitered cuts with minimum tearout. Use on machines such as radial arm, up-cut, chop and cutoff saws.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies ...

For Cutting: Corian® Gibraltar® Avonite® Surell® Fountainhead® Etc
Provides chip free cutting of solid surface materials such as Corian®, Gibraltar®, Avonite®, Surell®, Fountainhead®, etc. Zero and negative hook angle reduces chipping on the surface of the material. Triple Chip and Raker tooth design.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional ...

For Cutting: Softwoods, Hardwoods
Designed for cross cutting softwoods and hardwoods where a quality cut is required with minimum waste. Alternate top bevel tooth design. Provides smooth cuts with minimum tearout on end grain applications even in thin material. Use of stiffening collars is recommended.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding ...

For Cutting: Softwoods, Hardwoods
Designed for cross cutting softwoods and hardwoods where a quality cut is required with minimum waste. Triple chip tooth design for long tool life. Provides smooth cuts with minimum tearout on end grain applications even in thin material. Use of stiffening collars is recommended.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) ...

For Cutting: Softwoods, Hardwoods & Laminated Board
Designed for cross cutting soft and hardwoods where a quality cut is required on radial arm saws. Alternate top bevel tooth design. Provides smooth cuts with minimum tearout. Zero hook angle prevents grabbing/picking of material.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or ...

For Cutting: Softwoods, Hardwoods & Laminated Board
Designed for portable miter saws. Provides chip free cutting of both hard and softwoods. Excellent for climb cut applications. Negative hook reduces splintering and "grabbing". Provides smooth cuts and minimum tearout in wood.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or ...

For Cutting: Softwoods, Hardwoods & Laminated Board
Designed for cross cutting soft and hardwoods where longer tool life is required. Triple chip tooth design for long tool life. Provides smooth cuts with minimum tearout. Zero hook angle prevents grabbing/picking of material.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or ...

For Cutting: Softwoods, Hardwoods & Laminated Board
Provides chip free cutting of laminates such as melamine, Formica®, etc. Excellent choice in manual feed climb cut applications. Negative hook angle reduces chipping of the laminate. Triple Chip and Raker tooth design.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or ...

For Cutting: Softwoods, Hardwoods & Man-Made Material
Designed for cross cutting softwoods and hardwoods where a superior quality cut is required. Alternate top bevel tooth design. Provides smooth cuts with minimum tearout on end grain applications even in thin material.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or Mounting ...

For Cutting: MDG, Particle Board, Plywood & other Composite Materials
Designed for cutting composite materials. Triple chip and raker tooth design. Excellent choice for long tool life and abrasive applications. Provides excellent cuts on material.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or Mounting Hole(s).

For Cutting: Melamine, Formica®, Paper, Veneers, Soft & Hardwoods
Provides chip free cutting of laminated material. Excellent for climb cut applications. Negative hook reduces splintering and "grabbing". High shear alternate top bevel tooth design. Provides smooth cuts and minimum tearout in wood.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when ...

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or Mounting Hole(s).

For Cutting: Laminated & Raw MDF, Plywood, Particle Board
Designed for the high demands of panel saws. Used for cutting single and stacked sheets of laminated or raw MDF, Particleboard, Plywood, etc. Triple chip tooth design for high quality cuts and longevity.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or Mounting ...

For Cutting: Laminated & Raw MDG, Plywood, Particle Board
Designed for the high demands of panel saws. For pre-scoring the bottom sheet. Can also be used on sliding table saws. Also used table saws that utilize pre-scoring units.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or Mounting Hole(s).

For Cutting: Laminated & Raw MDF, Plywood, Particle Board
Designed for the high demands of panel saws. For pre-scoring the bottom sheet. Can also be used on sliding table saws. Also used table saws that utilize pre-scoring units.

Quantity discounts are available please call 800-634-8665 for quote.

Cannot ship to locations outside the U.S. at this time.

Modifications
Open bore (to a maximum of 2" (50.8 mm)) larger than bore size indicated in this catalog. An additional charge applies to open bore a saw blade listed. Keyways and/or Mounting Holes can be added. An additional charge applies when adding a Keyway(s) and/or Mounting Hole(s).